Skip to main content

Oyvind's Circuit Tips: Remember to set aside time

I finished the course, and now I have a pretty good understanding of how to use Adobe Illustrator with a drawing pad. It's great, because now I feel m  ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌

A while back I wanted to improve my drawing skills.

But I kept postponing. I had the very common challenge that you probably have had yourself when learning electronics:

I didn't have enough time!

​
Then one weekend I finally set aside some time. I blocked out 4 hours. And I sat down to go through an interesting course about using a drawing pad.

I finished it, and I ended up with a pretty good understanding of how to use Adobe Illustrator with a drawing pad.

It was really great because suddenly my skills in drawing had improved a lot. And it gave me a great feeling of accomplishment.

Just because I sat aside 4 hours on Sunday.
​

The only way to have time to do what you want is to set aside time for it.

Want to learn microcontrollers? PCB design? Basic electronics? Then you need to set aside time for it.

​
Keep On Soldering!
Oyvind @ build-electronic-circuits.com

PS: Sunday is Ohmify's birthday, so look out for a nice birthday deal in your inbox 😉 But it won't help if you don't set aside time to learn, so make sure you start carving out time in your calendar for learning electronics.

Comments

Popular posts from this blog

Understanding voltage by digging a hole

John is 1.8 meters (6 feet) tall. And in this email I'm going to put him into a hole to show you what negative voltage means. But first, what does it mean that John is 1.8 m tall? Could you find his height by only looking at his head? No. You have to compare the top of his head to the ground he is standing on to be able to find his height. That John is 1.8 m tall really means that the top of his head is 1.8 m higher than the ground that he stands on. ​ It's the same thing with voltage. You can't say anything about the voltage without comparing it to another point. It's common to define a zero point, or "ground", in a circuit. In a simple battery circuit, the ground point is usually the minus terminal of the battery. So if someone says that "this point is 5V", they usually mean it's 5V compared to ground. ​ What is a negative voltage? Back to John. What if we dig a hole of 1.8 meters, then put John into the hole. (Poo...

Design and construct it! A DIY speaker resonance tester, a compact warning flasher, and more

If you can't see this message properly, view it in your browser. May 10, 2024 | #590    Compact Warning Flasher This little project should give peace of mind to bicycle riders pedaling in the dark without street lighting. At the same time it provides early warning to faster, motorized road users to pay attention and pass with care.   more...     Fnirsi SWM-10: Repair Battery Packs With This Portable Intelligent Spot Welding Machine (Review) Anyone who has ever tried to solder a wire or metal strip to a battery will know that this is near to impossible. What you really need for such a repair job is a spot welding tool. This is where the Fnirsi SWM-10 comes in.   more...     Raspberry Pi   ...

Weekend DIY electronics projects! Talking colorimeter, gamma ray measurement, and more

If you can't see this message properly, view it in your browser. May 3, 2024 | #589    Measure Gamma Rays with a Photodiode: Radiation Detector Using a BPW34 The first device that springs to mind when thinking about measuring radioactivity is the Geiger-Müller tube. However, these counter tubes can be difficult to find and expensive; and, even if you do manage to get hold of one, you will still need to find a way to generate its operating voltage of several hundred volts. It is less well known that even a humble photodiode such as the BPW34 can be used to detect X-rays and gamma radiation.   more...     The Andonstar AD210, an Affordable Digital Microscope with a 10.1" Display The Andonstar AD210 is an entry-level model digital microscope with a large 10.1...