Skip to main content

The crafty door scare contraption

Just one week left until Halloween! Here's a simple project you can use to scare some friends and family.

Cut out two pieces of aluminum foil. Place one on top of the door (on the hinge side) and the other on the door frame. Place them so that they are not touching while the door is closed, but will touch when the door opens.

Use this as a switch to trigger whatever you want when the door opens.

In the example image above I've connected an active buzzer that will sound a loud beep when the door is opened to illustrate the concept.

But you can easily swap out the buzzer with something more scary, like a car horn, a spooky laugh (from a sound module), or a spring-loaded skeleton that jumps out as soon as the door opens.


Keep On Soldering!
Oyvind @ build-electronic-circuits.com

PS: If you're new to electronics - or trying to get back into it - here are two ways I can help you learn electronics:

  • ​Join Ohmify​: Ohmify is for people interested in electronics who want to learn skills like PCB design, soldering, and project-building - while also getting a proper understanding of the basics.
  • Get the eBook ​Fun Circuit Experiments with Sound and Light​ where you'll learn basic electronics through experiments. If you're new to electronics, this is the perfect place to start. The book comes bundled with a component kit for an easy beginning of your journey.

Comments

Popular posts from this blog

Design and construct it! A DIY speaker resonance tester, a compact warning flasher, and more

If you can't see this message properly, view it in your browser. May 10, 2024 | #590    Compact Warning Flasher This little project should give peace of mind to bicycle riders pedaling in the dark without street lighting. At the same time it provides early warning to faster, motorized road users to pay attention and pass with care.   more...     Fnirsi SWM-10: Repair Battery Packs With This Portable Intelligent Spot Welding Machine (Review) Anyone who has ever tried to solder a wire or metal strip to a battery will know that this is near to impossible. What you really need for such a repair job is a spot welding tool. This is where the Fnirsi SWM-10 comes in.   more...     Raspberry Pi   ...

New book 👉 Tektronix Epic Oscilloscopes 

An illustrated chronicle of Teknology for collectors and restorers  ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­  Hello manoj , This new Elektor book traces the history of a crucial instrument through many Tektronix products. In nearly 600 pages, with hundreds of gorgeous photos, diagrams, anecdotes, and t...

What goes in, must come out

There's no need to waste time trying to understand how any circuit works before you get this: The current flowing into your circuit is always the same  ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌...